Thermal Tracking

Posted May 5, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


What is Thermal Tracking?  Have you ever looked up to your ceiling in your home very closely? If you do you may see what looks like uniform stripes across your ceiling.  You may then question whether it is mold.

If you have ruled out having roof leaks, or any mold on the backside of the drywall in the attic, you may very well have Thermal Tracking.  This is a problem indicative of bad air quality throughout your home. 

In the winter months when the furnace is running, the difference in temperature between the attic and the interior of your home has a wider variance.  Insulation works to keep the difference temperate between the interior of the home and the attic.  However, under the floor joists in the attic, there is not  any insulation at all.  There is simply the drywall attached to the joist.  Herein lies  the problem.

It is here that the fluctuation in temperature can create condensation that appears on the underside of the joist in the attic, then subsequently on the ceiling drywall  in your home.  This is not visible to the naked eye.

Because there is condensation, particles that may be suspended in the air are attracted to the condensation and settle there.  Particles include, but are not limited to;  dirt, molds, dust, dust mite feces, pet dander, fibers, skin cells, etc..   Here they collect, darkening the moist area along the line of the ceiling joist, or attic floor joist.

After a time period, stripes will form on the ceiling.

The first step is to  rule out any mold, using a Licensed, Insured Mold Assessor. Once clearance is given, you may proceed to cleaning off the discoloration with a Remediator reccomended, non-toxic anti-microbial.

To solve the problem, from re-occuring, positive charges in the home must be reduced.  Particles must be  dropped out of the air.  This will eliminate the problem.  We suggest a whole home Air Purification System that includes negative ionization.  Many systems are relatively inexpensive today.

Air & EnviroSolutions Technologies Group is your One Stop for all of your indoor environmental needs.   We are Licensed as Mold Assessors and Mold Remediators, and fully insured.  We specialize in installing  purification systems in homes, businesses and schools  Call us today!

Attic Mold

Posted April 18, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


Now that you have discovered mold in your attic, what do you do now?

The most important first step is to have it assessed, sampled, and tested by a Licensed Mold Assessor.  Licensing is not required in every State, but, it really is suggested to cut out all of the fraud within the industry.  Licensed Mold Assessors and Remediators are thoroughly Certified, up to date, background checked, and compliant with rigorous  standards in the States who are licensing.

If your State does not require it, there are still Licensed Assessors and Remediators available in your State who have acquired licensing through other States.

Once you find out the type and quantity of the contamination, your Assessor should have found, and explained to you the source and remedies for the mold intrusion.

The next step is to hire a Licensed Mold Remediator to correct the problem.  The Licensed Mold Remediator will correct the ventilation, exhaust, or humidity problem currently at fault, that caused the mold problem to begin with. 

  Always the best next step to take, is to remove and replace the decking in the attic, and the insulation.  If this is not possible, another remedy would be to have the substrates, or the decking, scrubbed, cleaned, sanitized and a anti-microbial applied, followed by a protectant.

An attic sanitization or remediation, is not as scary as it seems.

A Licensed Professional deals with attics often, and can guide you in the right direction.

For all of your attic mold issues, contact:  Air & EnviroSolutions Technologies Group,  We are Licensed as Mold Assessors and Remediators.                                                 www.correctprotectyou.com   (877)-854-6080

What Do You Do When You Find MOLD?

Posted April 14, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


What do you do when you find mold  in your home?

A good idea would be to cover it with plastic wrap.  This will prevent the spores from releasing themselves, becoming airborne, and you inhaling them.

Until a determination can be made by a Certified, preferably LICENSED mold Inspector, you should not attempt to come into contact with the mold.

Many molds are highly toxic, allergenic and problem causing to our health.

Young children, infants, the elderly, or the immune compromised can be negatively affected by molds rather quickly.

Not only the type, but the quantity is very important to be determined.

A knowledgeable Inspector will be able to write reccomendations, or a remediation program for you to follow up with a Remediator.

Do not risk your Health!

Air & EnviroSolutions Technologies Group

Licensed CMA,CMR 

Your One Stop for All of your indoor environmental needs!

1-(877)-854-6080

Can I Remove the Mold in my House?

Posted March 12, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


       Yes, anyone can remove the mold in their home.  The problem comes with the lack of knowledge regarding the toxicity of molds.

The benefiit and necessity of hiring a Licensed, Certified Professional in either Assessment or Remediation, is that they are highly trained in the field.

Mold spores can be toxic, pathogenic, and deteriorating.  Once a colony is established on a surface, the mold will dry out, and as we say, “spore off”.  When this occurs, they will migrate through the air by current or positive charges, and land.  Once they land,  they may form together if the environment allows, and re-colonize.

The spores will feed off the materials if it  contain water and cellulose.  Most man-made products contain these items.

     If the homeowner decides to tackle the project himself, or herself, the situation may become worse, by the spreading of spores, breathing in toxic mycotoxins given off by these spores, or use the incorrect product to remove and clean the moldy areas. 

     If the area is not properly contained, the spores will travel to other areas.  At the same time the area is being contained, the Professional uses equipment to remove the contaminated air within the area, while removing the mold.

The homeowner will believe they have removed the mold, but because the spores are now in the air, the area will be re-contaminated  again. By spreading the spores they will either be breathed in, and or contained on the clothing, skin and hair of the homeowner.  If the mold is toxic or pathenogenic, that could mean big health problems, including death.  No products on the market available to the general public to purchase will kill mold at the root.  These products are designed very weak, so you will purchase them again, and again, wondering why the mold reappears.

If the mold is not killed at the roots with the proper technology, it may also damage the building materials.  This down the road results in highly costly repairs, even compromising the structure.

Play it safe.  Hire a Licensed, Certified Mold Professional.

Licensing is not required in Michigan, but a serious professional will have obtained licensing from a State that does require it, in order to keep up with the most ardent,rigorous requirements in the industry.

Call us today! 

 Air & EnviroSolutions Technologies Group

 1-(877)-854-6080  

www.correctprotectyou.com

Selling You Home and Mold

Posted March 9, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


What are your responsibilities when you know there is mold in your home, and you want to list it for sale?   Most States require a disclosure outlining past problem, occurrences, and what was done to remedy the problem.

This is very important especially if you are on the buying side of the contract.  As a seller, you will obviously be buying, or moving into another residence as well.

There is a type of panic and defeat when a home is purchased and is discovered to have a mold problem.  Worse yet, mysterious illnesses, and respiratory problems can occur for the occupants, especially infants, children and the elderly.

The responsibilites are more than physical when it comes down to  disclosing  past problems, they are moral as well.

Numerous health  issues that last a lifetime can occur from environmental contamination.   Debilitating disease can arise, even death.  It is extremely important to disclose the problems you are aware of.

Have your home mold inspected by a Certified, Licensed Mold Assessor before you list or put an offer in on a home.

On the selling side, remedy all issues through a Certified, Licensed Mold Remediator.  Not all States currently license this profession, but a firm who is licensed, you can be sure is highly qualified, and keeps up with all of the latest information. These firms are also highly educated within this field, more so than non licensed, non certified firms.

You also want to be positive that the firm you hire is CERTIFIED.  They must be certified by an outside certifying agency.  This how you can be sure their education, skill and technique in the industry is current.

Do not be fooled or scammed by companies who certify themselves.  This can result in liability to you, sickness, and throwing away your money because the job was botched.

Air & EnviroSolutions Technologies Group is Certified, and has met Mold Assessor and Remediation  Licensing  requirements.

Call us today for all of your Indoor Environmental Problems

www.correctprotectyou.com   (877)-854-6080

Bleach Does Not Kill Mold

Posted March 7, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


CHLORINE BLEACH IS INEFFECTIVE IN KILLING MOLD FOR THESE REASONS: The object to killing mold is to kill its “roots”. Mold remediation involves the need to disinfect wood and wood-based building materials

, all of which are porous materials. Thus, chlorine bleach should not be used in mold remediation as confirmed by OSHA’s Mold Remediation/ Clean Up Methods guidelines. The use of bleach as a mold disinfectant is best left to kitchen and bathroom countertops, tubs and shower glass, etc.

Chlorine Bleach does kill bacteria and viruses, but has not been proven effective in killing molds on non-porous surfaces. Bleach itself is 99% water. Water is one of the main contributors of the growth of harmful bacteria and mold. Current situations using bleach re-grew and regenerated mold and bacteria twice the CFU counts than were originally found before bleaching, within a short period of time. Bleach is an old method used for some bacteria and mold. It is the only product people have known for years. The strains now associated within Indoor Air quality issues are resistant to the methods our grandmothers employed to clean-up mold. What potential mold ‘killing’ power chlorine bleach might have is diminished significantly as the bleach sits in warehouses, on grocery store shelves or inside your home or business 50% loss in killing power in just the first 90 days inside a never opened jug or container. Chlorine constantly escapes through the plastic walls of its containers. The ionic structure of bleach prevents Chlorine from penetrating into porous materials such as drywall and wood—it just stays on the outside surface, whereas mold has enzyme roots growing inside the porous construction materials—however, the water content penetrates and actually FEEDS the mold—this is why a few days later you will notice darker, more concentrated mold growing (faster) on the bleached area. Chlorine Bleach accelerates the deterioration of materials and wears down the fibers of porous materials. Chlorine Bleach is NOT registered with the EPA as a disinfectant to kill mold. You can verify this important fact for yourself when you are unable to find an EPA registration number for killing mold on the label of any brand of chlorine bleach. Chlorine bleach off gases for a period of time. Chlorine off gassing can be harmful to humans and animals. It has been known to cause pulmonary embolisms in low resistant and susceptible people. Chlorine bleach will evaporate within a short period of time. If the area is not dry when the bleach evaporates, or moisture is still in the contaminated area (humidity, outside air dampness), you could re- start the contamination process immediately and to a greater degree. Chlorine is a key component of DIOXIN. One of the earliest findings of dioxin’s toxicity in animals was that it caused birth defects in mice at very low levels. This finding led to dioxin being characterized as “one of the most potent teratogenic environmental agents”. The first evidence that dioxin causes cancer came from several animal studies completed in the late 1970′s. The most important of these, published in 1978 by a team of scientists from Dow Chemical Company, led by Richard Kociba, found liver cancer in rats exposed to very low levels of dioxin. This study helped establish dioxin as one of the most potent animal carcinogens ever tested and, together with the finding of birth defects in mice, led to the general statement that

dioxin is the “most toxic synthetic chemical known to man.”
Air & EnviroSolutions Technologies Group knows that Bleach Does Not Kill Mold.
We use Green, Non toxic Methods to rid your Indoor Environment of Toxic Material, Mold and MRSA
1-877-854-6080   www.correctprotectyou.com  
Call us today for Free 6 month Follow Up Testing and a Gas Card Incentive to help combat this Econmomy!

 

 

What Do You Do When You Find Mold?

Posted March 6, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


          You never do know if what you have is mold, dirt, grease, or some other agent.  Whether you take a mold sample yourself, or hire a mold inspector to perform the sampling, it should be done.   You will receive a copy of the report from a laboratory.  Be sure the laboratory Certification from the States that license mold assessment and remediation.  Why?  I will tell you why. Those labs are put under much more rigid standards, qualifications, and guidelines to meet.  You will be rest assured everything is on target and up to date with their operation, in order to keep their certifications.

            One you receive the results, you will have to decipher them.  That is not easy, you will need to understand something about molds, fungus, and the nature of them.  A little research should get you through.  You really need to understand the danger of molds to know how to handle the situation.

     A good Mold Assessor, such as those at Air & EnviroSolutions Technologies Group, is Certified, Licensed in a State that requires those standards.  Why?  Because, those standards force us to meet rigid; security, educational, training, certifying requirements.  Anyone can say one day “I am a Mold Inspector”.    Are they a Licensed Assessor?  It does not matter if they are not Licensed in the State they operate.   What the consumer should be concerned with is that this Mold Assessor, or Mold Remediator follows the highest possible standards.  That is what you want for you, your family, and your home,

     Air & EnviroSolutions Technologies Group has a highly trained, continuously trained staff.  Did the inspector you hired get his knowledge off a computer course?  Air & EnviroSolutions Technologies Group staff has years of schooling, hands on training, and weekly trainings through an outside training agency.  This allows our firm to learn the latest in knowledge, technique, and technology to do our job and to keep you and those you care about safe and healthy.

Call Air & EnviroSolutions Technologies Group today

www.correctprotectyou.com   1-(877)-854-6080

for your Professional Mold Inspection or Mold Remediation in Michigan or Ohio.

We do not offer Free Services, because we are Professionals

BUT,   we do tie in Free Incentives to our Services, that we aquire through our Partners, Service Providers, and Laboratories that we work with

Free Gas Cards, Free 6 Month Re-Tests  this helps you with the current economy and helps us!

Mold Names and Types

Posted March 5, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


MOLD TYPES

 There are many types of mold.  Mold outside is good.  Mold has its place.  Mold inside of our home is not good.  It multiplies, spores off, and creating mycotoxins, we breath it in.  

Here is a description of various types of molds, and their natural purpose. But remember, molds have no purpose in our homes. 

Absidia sp – A zygomycete fungus which is considered common to the indoor environment. Reported to be allergenic. May cause mucorosis in immune compromised individuals. The sites of infection are the lung, nasal sinus, brain, eye, and skin. Infection may have multiple sites. Absidia cormbifera has been an invasive infection agent in AIDS and neutropenic patients, as well as, agents of bovine mycotic abortions, and feline subcutaneous abscesses. Acremonium species may be confused with Fusarium species that primarily produce microconidia in culture. Fusarium genera are generally much more rapid growers and produce more aerial mycelium.

Acremonium sp (Cephalosporium sp.) – Reported to be allergenic. Can produce a trichothecene toxin which is toxic if ingested. It was the primary fungus identified in at least two houses where the occupant complaints were nausea, vomiting, and diarrhea. Asexual state of Emericellopsis sp., Chaetomium sp., and Nectripsis sp. It can produce mycetomas, infections of the nails, onychomycosis, corneal ulcers, eumycotic mycetoma, endophthalmitis, meningitis, and endocarditis.

Alternaria sp – Extremely widespread and ubiquitous. Outdoors it may be isolated from samples of soil, seeds, and plants. It is commonly found in outdoor samples. It is often found in carpets, textiles, and on horizontal surfaces in building interiors. Often found on window frames. The species Alternaria alternata is capable of producing tenuazonic acid and other toxic metabolites which may be associated with disease in humans or animals. Alternaria produces large spores having sizes between 20 – 200 microns in length and 7 – 18 microns in width, suggesting that the spores from this fungi are deposited in the nose, mouth, and upper respiratory tract. It may be related to bakers asthma. It has been associated with hypersensitivity pneumoniti, sinusitis, deratomycosis, onychomycosis, subcutaneous phaeohyphomycosis, and invasive infection. Common cause of extrinsic asthma (immediate-type hypersensitivity: type I). Acute symptoms include edema and bronchiospasms, chronic cases may develop pulmonary emphysema.

Arthrinium phaeospermum- Widespread saprophyte on dead plant material, particularly swampy grasses. Should be considered an allergen. This fungus has also been documented in various subcutaneous infections. No toxic related diseases are of record to date.

Ascomycete.- One of the major classes of fungal organisms. This class contains the the”sac fungi” and yeasts. Some ascomycete spores can be identified by spore morphology, however; some care should be excersised with regard to specific identification. Many ascomycete spores are reported to be allergenic.

Aspergillus sp – A genus of fungi containing approximately 150 recognized species. Members of this genus have been recovered from a variety of habitats, but are especially common as saprophytes on decaying vegetation, soils, stored food, feed products in tropical and subtropical regions. Some species are parasitic on insects, plants and animals, including man. Species within this genus have reported Aw’s (water activities) between 0.75 – 0.82. All of the species contained in this genus should be considered allergenic. Various Aspergillus species are a common cause of extrinsic asthma (immediate-type hypersensitivity: type I). Acute symptoms include edema and bronchiospasms. Chronic cases may develop pulmonary emphysema. Members of this genus are reported to cause a variety of opportunistic infections of the ears and eyes. Sever pulmonary infections may also occur. Many species produce mycotoxins which may be associated with disease in humans and other animals. Toxin production is dependent on the species or a strain within a species and on the food source for the fungus. Some of these toxins have been found to be carcinogenic in animal species. Several toxins are considered potential human carcinogens.

Aureobasidium pullulans – A cosmopolitan fungus with the main habitat apparently on the aerial parts of plants. Frequently found in moist environments. This fungus should be considered allergenic. This species has been associated with deratitis, peritonitis, pulmaonary infection, and invasive disease in AIDS patients. Probably aquired by traumatic implantation. May be recovered as a contaminant from human cutaneous sites. No toxic diseases have been documented to date.

Basidiomycetes – One of the major classes of fungal organisms. This class contains the mushrooms, shelf fungi, puffballs, and a variety of other macrofungi. It is extremely difficult to identify a specific genera of mushrooms by using standard culture plate techniques. Some basidiomycete spores can be identified by spore morphology, however; some care should be exercised with regard to specific identification. Many basidiomycete spores are reported to be allergenic.

Bipolaris sp – A widespread fungus that is most frequently associated with grasses, plant material, decaying food, and soil. It is common to both indoor and outdoor environments. Older obsolete names include Drechslera and Helminthosporium. This fungus produces large spores which would be expected to be deposited in the upper respiratory tract. Various species of this fungus can produce the mycotoxin – sterigmatocystin which has been shown to produce liver and kidney damage when ingested by laboratory animals.

Candida sp – This genus contains a variety of organisms that have been isolated from the environment, as well as human skin and mucous membranes.

Chaetomium sp. – Large ascomycetous fungus producing perithecia. It is found on a variety of substrates containing cellulose including paper and plant compost. It can be readily found on the damp or water damaged paper in sheetrock.

Chrysosporium spp – Widespread, common in the soil and on plants. Rare agents of onychomycosis, skin lesions, endocarditis, and uncommon agents of the pulmonary mycosis adiaspiromycosis. No toxic diseases have been documented to date.

Cladosporium sp. (Hormodendrum sp.) – Aw (water activity) in the range of 0.84 to 0.88. Most commonly identified outdoor fungus. The outdoor numbers are reduced in the winter. The numbers are often high in the summer. Often found indoors in numbers less than outdoor numbers. It is a common allergen. Indoor Cladosporium sp. may be different than the species identified outdoors. It is commonly found on the surface of fiberglass duct liner in the interior of supply ducts. A wide variety of plants are food sources for this fungus. It is found on dead plants, woody plants, food, straw, soil, paint and textiles. It can cause mycosis. Produces greater than 10 antigens. Antigens in commercial extracts are of variable quality and may degrade within weeks of preparation. Common cause of extrinsic asthma (immediate-type hypersensitivity: type I). Acute symptoms include edema and bronchiospasms, chronic cases may develop pulmonary emphysema.

Curvularia sp. – Reported to be allergenic. It may cause corneal infections, mycetoma and infections in immune compromised hosts.

Dreschlera sp – Conidia (spores) dimensions 40-120 x 17-28 microns. Found on grasses, grains and decaying food. It can occasionally cause a corneal infection of the eye.

Epicoccum sp. – Conidia (spores) dimensions 15-25 microns. A common allergen. It is found in plants, soil, grains, textiles, and paper products.

Fusarium sp – Aw (water activity) 0.90. A common soil fungus. It is found on a wide range of plants. It is often found in humidifiers. Several species in this genus can produce potent trichothecene toxins (5, 27). The trichothecene (scirpene) toxin targets the following systems: circulatory, alimentary, skin, and nervous. Produces vomitoxin on grains during unusually damp growing conditions. Symptoms may occur either through ingestion of contaminated grains or possibly inhalation of spores. The genera can produce hemorrhagic syndrome in humans (alimentary toxic aleukia). This is characterized by nausea, vomiting, diarrhea, dermatitis, and extensive internal bleeding. Reported to be allergenic. Frequently involved in eye, skin and nail infections.

Geotrichum sp. – Aw (water activity) 0.90. Conidia (spores) dimensions 6-12 x 3-6 microns. Aw (water activity) 0.90. A common contaminant of grains, fruits, dairy products, paper, textiles, soil and water, and often present as part of the normal human flora. The species Geotrichum candidum can cause a secondary infection (geotrichosis) in association with tuberculosis. This rare disease can cause lesions of the skin, bronchi, mouth, lung, and intestine.

Mucor sp. – Often found in soil, dead plant material, horse dung, fruits, and fruit juice. It is also found in leather, meat, dairy products, animal hair, and jute. A Zygomycetes fungus which may be allergenic (skin and bronchial tests) (7, 17). This organism and other Zygomycetes will grow rapidly on most fungal media. May cause mucorosis in immune compromised individuals. The sites of infection are the lung, nasal sinus, brain, eye, and skin. Infection may have multiple sites.

Nigrospora sp – Reported to be allergenic.

Paecilomyces sp – Commonly found in soil and dust, less frequently in air. P. variotii can cause paecilomycosis. Linked to wood-trimmers disease and humidifier associated illnesses. They are reported to allergenic. Some members of this genus are reported to cause pneumonia. It may produce arsine gas if growing on arsenic substrate. This can occur on wallpapers covered with paris green.

Papulospora sp. – This fungi is found in soil, textiles, decaying plants, manure, and paper.

Penicillium sp – Aw (water activity) 0.78 – 0.88. A wide number of organisms have placed in this genera. Identification to species is difficult. Often found in aerosol samples. Commonly found in soil, food, cellulose, and grains (17, 5). It is also found in paint and compost piles. It may cause hypersensitivity pneumonitis and allergic alveolitis in susceptible individuals. It is reported to be allergenic (skin) (7, 17). It is commonly found in carpet, wallpaper, and in interior fiberglass duct insulation (NC). Some species can produce mycotoxins. Common cause of extrinsic asthma (immediate-type hypersensitivity: type I). Acute symptoms include edema and bronchiospasms, chronic cases may develop pulmonary emphysema.

Periconia sp – No information available, more to come.

Phoma sp. – A common indoor air allergen. It is similar to the early stages of growth of Chaetomium sp. The species are isolated from soil and associated plants (particularly potatoes). Produces pink and purple spots on painted walls (3, 17). It may have antigens which cross-react with those of Alternaria sp. It will grow on butter, paint, cement, and rubber. It may cause phaeohyphomycosis, a systematic or subcutaneous disease.

Pithomyces sp. – Grows on dead grass in pastures. Causes facial eczema in ruminants.

Rhizomucor sp. – The Zygomycetous fungus is reported to be allergenic. It may cause mucorosis in immune compromised individuals. It occupies a biological niche similar to Mucor sp. It is often linked to occupational allergy. The sites of infection are the lung, nasal sinus, brain, eye, and skin. Infection may have multiple sites.

Rhizopus sp – The Zygomycetous fungus is reported to be allergenic. It may cause mucorosis in immune compromised individuals. It occupies a biological niche similar to Mucor sp. It is often linked to occupational allergy. The sites of infection are the lung, nasal sinus, brain, eye, and skin. Infection may have multiple sites.

Rhodotorula sp – A reddish yeast typically found in moist environments such as carpeting, cooling coils, and drain pans. In some countries it is the most common yeast genus identified in indoor air. This yeast has been reported to be allergenic. Positive skin tests have been reported. It has colonized in terminally ill patients. Sporotrichum sp – Reported to be allergenic. See also Sporothrix sp. as there is some taxonomic confusion between these two genera. This genera does not cause sporotrichosis.

Stachybotrys sp. – Aw (water activity) – 0.94, optimum Aw (water activity) – >0.98. Several strains of this fungus (S. atra, S. chartarum and S. alternans are synonymous) may produce a trichothecene mycotoxin- Satratoxin H – which is poisonous by inhalation. The toxins are present on the fungal spores. This is a slow growing fungus on media. It does not compete well with other rapidly growing fungi. The dark colored fungi grows on building material with a high cellulose content and a low nitrogen content. Areas with relative humidity above 55% and are subject to temperature fluctuations are ideal for toxin production. Individuals with chronic exposure to the toxin produced by this fungus reported cold and flu symptoms, sore throats, diarrhea, headaches, fatigue, dermatitis, intermittent local hair loss, and generalized malaise. The toxins produced by this fungus will suppress the immune system affecting the lymphoid tissue and the bone marrow. Animals injected with the toxin from this fungus exhibited the following symptoms: necrosis and hemorrhage within the brain, thymus, spleen, intestine, lung, heart, lymph node, liver, and kidney. The mycotoxin is also reported to be a liver and kidney carcinogen. Affects by absorption of the toxin in the human lung are known as pneumomycosis. This organism is rarely found in outdoor samples. It is usually difficult to find in indoor air samples unless it is physically disturbed. The spores are in a gelatinous mass. Appropriate media for the growth of this organism will have a high cellulose content and a low nitrogen content. The spores will die readily after release. The dead spores are still allergenic and toxigenic. Percutaneous absorption has caused mild symptoms.

Stemphylium sp. – Reported to be allergenic. Isolated from dead plants and cellulose materials.

Syncephalastrum sp. – Can cause a respiratory infection characterized by a solid fungal ball.

Trichoderma sp – It is commonly found in soil, dead trees, pine needles, paper, and unglazed ceramics. It often will grow on other fungi. It produces antibiotics which are toxic to humans. It has been reported to be allergenic (7, 17). It readily degrades cellulose.

Trichophyton sp – Can cause ring worm, athlete’s foot, skin, nail, beard, and scalp (5, 6). Reported to be allergenic. Found on soil and skin.

Ulocladium sp – Has an Aw (water activity) of 0.89. Isolated from dead plants and cellulose materials. Found on textiles.

Verticillium sp – Conidia (spores) dimensions 2.3-10 x 1-2.6 microns. Found in decaying vegetation, on straw, soil, and arthropods. A rare cause of corneal infections.

Wallemia sp – Has an Aw (water activity) of 0.75. Conidia (spores) dimensions 2.5-3.5 microns. Found in sugary foods, salted meats, dairy products, textiles, soil, hay, and fruits.

Yeast – Various yeasts are commonly identified on air samples. Some yeasts are reported to be allergenic. They may cause problems if a person has had previous exposure and developed hypersensitivity. Yeasts may be allergenic to susceptible individuals when present in sufficient concentrations.

 

Mold in Foreclosed Homes

Posted March 4, 2011 by toxic mold/MRSA Air & EnviroSolutions Technologies Group
Categories: Uncategorized


 Air & EnviroSolutions Technologies Group knows;

Mold infestation in bank-owned, vacant houses is a serious problem throughout the country. Water, sewage, flooding and leaking problems go untreated when there the homeowner is missing. Even in the event of water infiltration, and lack of maintenance, unoccupied homes in humid areas can quickly become infested with mold. The recent real estate collapse has led to a growing number of , abandon, moldy owned REO homes.

Any mold, but particularly black mold, can scare away buyers and drive the price of the real estate. Damage can be intensive, requiring large remediation efforts to make the home habitable again.

Once a home, condo or apartment building is severely infested, it can become difficult to remove hidden mold. A qualified mold inspector is needed. In the worst cases, floors and walls must be torn away to correct the problems. Many REO properties do not have documented histories about past conditions or treatments.

Infested foreclosed properties present challenges to a fine line for the Real Estate business.  There is mold in every vacant home, but the agent does not want the buyer to know that.

 A properly cleaned up mold home can be sold, and lived in, if done properly. However, if the issue not properly handled by a mold professional, the mold problem creates a high risk of lawsuits down the road, particularly if the new owner experience health problems due to new mold growth.

It is important to use Air & EnviroSolutions Technologies Group.  We are Licensed in Mold Remediation and Mold Assessment.  Very few are Licensed.

Licensing requires the highest requirements for training, security, continuing education in this field. 

Do not take short cuts when it comes to your health or property. We perform inspections on thousands of Foreclosed properties a year.

Remediation must  be completed  properly in order for a foreclosed home to be once again inhabited safely.

Call us today!

Air & EnviroSolutions Technologies Group

877-854-6080


Follow

Get every new post delivered to your Inbox.